Differences

This shows you the differences between two versions of the page.

--- userdoc:tt-dhcpv6-prefix-delegation [2017/06/03 14:30]
abelbeck [DHCPv6 Client Configuration]
+++ userdoc:tt-dhcpv6-prefix-delegation [2017/06/07 10:19]
abelbeck [DHCPv6 Client Action Script]
@@ Line 27: / Line 27: @@
 Internal Interfaces: -> Interface: -> IPv6 Autoconfig:\\
-!!Version ->!! AstLinux 1.2.5 to AstLinux 1.2.10\\
+!!Version ->!! AstLinux 1.2.5 to AstLinux 1.2.10 - ''IPv6/nn'' must be empty\\
 {{:userdoc:dhcpv6-internal-interface.jpg?nolink|DHCPv6 Internal Interface}}
-!!Version ->!! AstLinux 1.3.0 and later\\
+!!Version ->!! AstLinux 1.3.0 and later - ''IPv6/nn'' may define a ULA/64 address, or be empty\\
 {{:userdoc:ipv6-ula-nptv6-assign-gua.jpg?nolink|DHCPv6 Internal Interface}}
@@ Line 38: / Line 38: @@
 !!Note: AstLinux 1.2.10 or later is required!!
-!!Note: AstLinux 1.3.0 or later!! executes a default action if a custom script is not defined.
+!!Note: AstLinux 1.3.0 or later!! executes a default action, additional custom actions can enabled if a custom script is defined.
 If an executable script exists at ''/mnt/kd/dhcp6c.script'' the dhcp6c daemon will call the script after a DHCPv6 request is processed.
@@ Line 74: / Line 74: @@
 The ''dhcp6c_changed'' variable can be empty if there was no previous ''dhcp6c_cache'' file to compare, ''"yes"'' if different from previous, and ''"no"'' if the same as previous.  The most common use case would be to compare ''dhcp6c_changed'' with ''"no"'' to skip operations that have been previously performed.
-As an example, a simple script to log when the DHCPv6 lease is updated and whether it changed:
+As an example, a simple script to log when the DHCPv6 lease is updated and whether it changed:\\
+!!Note ->!! Occurs by default with AstLinux 1.3.0 or later
   #!/bin/bash