Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
userdoc:new-install [2017/08/18 09:23]
droemel [New Installation]
userdoc:new-install [2017/08/18 09:24] (current)
droemel [New Installation]
Line 8: Line 8:
 **Typical New Installation:​** **Typical New Installation:​**
  
-  - Download the appropriate astlinux-xxx-board.iso image from the [[http://​www.astlinux-project.org|AstLinux website]]. ((Various ISO images are available, built for specific [[devdoc:​boardtypes|hardware]]. If you are unsure which to download, for 32-bit use the astlinux-xxx-geni586.iso image, for 64-bit use the astlinux-xxx-genx86_64.iso image.)) Links to ISO installers for older hardware can be found [[userdoc:​legacy-installer-iso|here]].+  - Download the appropriate astlinux-xxx-board.iso image from the [[http://​www.astlinux-project.org|AstLinux website]]. ((Various ISO images are available, built for specific [[devdoc:​boardtypes|hardware]]. If you are unsure which to download, for 32-bit use the astlinux-xxx-geni586.iso image, for 64-bit use the astlinux-xxx-genx86_64.iso image.)) ​\\ Links to ISO installers for older hardware can be found [[userdoc:​legacy-installer-iso|here]].
   - Transfer the ISO image to a USB flash drive:   - Transfer the ISO image to a USB flash drive:
     * On Linux or *BSD use ''​dd''​ to transfer the image, where sdX is your USB flash drive\\ ''​$ dd if=astlinux-xxx-board.iso of=/​dev/​sdX''​     * On Linux or *BSD use ''​dd''​ to transfer the image, where sdX is your USB flash drive\\ ''​$ dd if=astlinux-xxx-board.iso of=/​dev/​sdX''​