Differences

This shows you the differences between two versions of the page.

--- userdoc:new-install [2020/04/26 07:13]
mkeuter [New Installation]
+++ userdoc:new-install [2020/04/26 07:43]
mkeuter [Persistent Storage Options (GUI)]
@@ Line 30: / Line 30: @@
   * Configuration data (/mnt/kd/), such as the Asterisk configuration files, system settings and voicemail messages.
-Using a single partition combining Unionfs data and /mnt/kd/ data is the default for new installations. Optionally, you may specify in the installation setup to create separate Unionfs and /mnt/kd/ partitions, resulting in two partitions for persistent storage.
+/*Using a single partition combining Unionfs data and /mnt/kd/ data is the default for new installations. Optionally, you may specify in the installation setup to create separate Unionfs and /mnt/kd/ partitions, resulting in two partitions for persistent storage.*/
 Using a computer on the same network, open your favorite web browser and type the following...
@@ Line 73: / Line 73: @@
   * The **/dev/sda1** partition is your original FAT16 data created by installing the astlinux-XXX.img .
-  * The **/dev/sda2** partition is...
+  * The **/dev/sda2** partition is the Unionfs partition.
-    * By default, the combined Unionfs and /mnt/kd/ partition.
+  * The **/dev/sda3** partition is for /mnt/kd/ data.
-    * Or, only the Unionfs partition if you selected separate partitions.
-  * The **/dev/sda3** partition is for /mnt/kd/ data if you selected separate partitions.
 Skip to **[[new-install#security_and_sound_files|Security and Sound Files]]** when completed.