Differences

This shows you the differences between two versions of the page.

--- userdoc:misdn [2010/09/29 17:20]
droemel
+++ userdoc:misdn [2014/04/12 05:52]
droemel [Usage]
@@ Line 1: / Line 1: @@
 ====== mISDN ======
 ===== Usage =====
+!!Note: AstLinux 1.x does not support mISDN anymore. Use DAHDI + Asterisk 1.8 or newer instead((some cards are supported by DAHDI now (hfcmulti by wcb4xxp, hfcpci by zaphfc/dahdi_hfcs).))!!
+The 3rd-party dahdi_hfcs (formerly zaphfc) DAHDI driver for single port HFC BRI cards is now included in the AstLinux 1.0.3 release.
+----
+\\
 In AstLinux 0.7 [[http://git.misdn.org/?p=mISDN.git;a=shortlog;h=mISDN_1_1|mISDN]] 1.1.9.2 and mISDNuser 1.1.9.1 are used.\\
@@ Line 9: / Line 15: @@
 ===== Problems =====
-mISDN 1.1 has a few problems with some cheap **single-port HFC-chipset ISDN PCI cards** when unloading the driver on Linux kernels ≥ 2.6.26. This is //not// specific to AstLinux ((AstLinux 0.7 uses 2.6.27)). When you use such an mISDN-compatible PCI card and mISDN is loaded, you will see the following issues:
+mISDN 1.1 has a few problems with some of those cheap __single-port HFC-chipset ISDN PCI cards__ (the 4-port HFC-multi cards do work!) when unloading the driver on Linux kernels ≥ 2.6.26. This is __not__ specific to AstLinux ((AstLinux 0.7 uses 2.6.27)). When you use such an mISDN-compatible PCI card and mISDN is loaded, you could see the following issues:
   * ''lspci'' will not work anymore -- you will see something like:\\ ''lspci: Cannot open /sys/bus/pci/devices/0000:00:0e.0/resource: No such file or directory''
   * when you try to do a ''misdn-init stop'' or ''misdn-init restart'' you will get a segfault (with the following "reboot workaround" you can just reboot, instead of restarting mISDN, if needed)
@@ Line 21: / Line 27: @@
 \\
+//The above issues are still existing when using the mISDN sourcecode from the Digium SVN (from Astlinux 0.7.5 onwards).//