This shows you the differences between two versions of the page.
Both sides previous revision
Previous revision
Next revision
|
Previous revision
Next revision
Both sides next revision
|
userdoc:misdn [2010/09/29 17:20] droemel |
userdoc:misdn [2012/04/09 07:47] droemel |
====== mISDN ====== | ====== mISDN ====== |
===== Usage ===== | ===== Usage ===== |
| |
| !!Note: AstLinux 1.x does not support mISDN. Use DAHDI + Asterisk 1.8 instead((some cards are supported by DAHDI now (hfcmulti by wcb4xxp, hfcpci by zaphfc/dahdi_hfcs).))!! |
| |
| * //The (unofficial) zaphfc DAHDI driver for single port HFC cards is now included in the AstLinux 1.0.0 release.// |
| * //Since zaphfc doesn't work with DAHDI 2.5.x, you can build a custom version with DAHDI 2.6 and the zaphfc successor dahdi_hfcs at http://build.astlinux.org now.// |
| |
| ---- |
| \\ |
| |
In AstLinux 0.7 [[http://git.misdn.org/?p=mISDN.git;a=shortlog;h=mISDN_1_1|mISDN]] 1.1.9.2 and mISDNuser 1.1.9.1 are used.\\ | In AstLinux 0.7 [[http://git.misdn.org/?p=mISDN.git;a=shortlog;h=mISDN_1_1|mISDN]] 1.1.9.2 and mISDNuser 1.1.9.1 are used.\\ |
===== Problems ===== | ===== Problems ===== |
| |
mISDN 1.1 has a few problems with some cheap __single-port HFC-chipset ISDN PCI cards__ when unloading the driver on Linux kernels ≥ 2.6.26. This is //not// specific to AstLinux ((AstLinux 0.7 uses 2.6.27)). When you use such an mISDN-compatible PCI card and mISDN is loaded, you will see the following issues: | mISDN 1.1 has a few problems with some of those cheap __single-port HFC-chipset ISDN PCI cards__ (the 4-port HFC-multi cards do work!) when unloading the driver on Linux kernels ≥ 2.6.26. This is __not__ specific to AstLinux ((AstLinux 0.7 uses 2.6.27)). When you use such an mISDN-compatible PCI card and mISDN is loaded, you could see the following issues: |
* ''lspci'' will not work anymore -- you will see something like:\\ ''lspci: Cannot open /sys/bus/pci/devices/0000:00:0e.0/resource: No such file or directory'' | * ''lspci'' will not work anymore -- you will see something like:\\ ''lspci: Cannot open /sys/bus/pci/devices/0000:00:0e.0/resource: No such file or directory'' |
* when you try to do a ''misdn-init stop'' or ''misdn-init restart'' you will get a segfault (with the following "reboot workaround" you can just reboot, instead of restarting mISDN, if needed) | * when you try to do a ''misdn-init stop'' or ''misdn-init restart'' you will get a segfault (with the following "reboot workaround" you can just reboot, instead of restarting mISDN, if needed) |
\\ | \\ |
| |
| //The above issues are still existing when using the mISDN sourcecode from the Digium SVN (from Astlinux 0.7.5 onwards).// |
| |