Differences

This shows you the differences between two versions of the page.

--- userdoc:legacy-installer-iso [2017/08/18 08:56]
abelbeck [PC Engines ALIX board]
+++ userdoc:legacy-installer-iso [2017/08/18 10:32]
abelbeck [CPU's that don't support PAE]
@@ Line 8: / Line 8: @@
 Some old generic x86 hardware may contain a CPU that does not support [[wp>Physical_Address_Extension|PAE]], notably some old, but popular HP thin clients with a Transmeta Crusoe CPU.
-The AstLinux bootloader, ''runnix-0.4'' and earlier works with non-PAE hardware, AstLinux 1.2.10 and earlier.  AstLinux 1.3 and later default to ''runnix-0.5'' which requires a CPU with PAE, but AstLinux 1.3 will also boot fine with ''runnix-0.4''.
+The AstLinux bootloader, ''runnix-0.4'' and earlier works with non-PAE hardware, included with AstLinux 1.2.10 and earlier.  AstLinux 1.3 and later default to ''runnix-0.5'' which requires a CPU with PAE, but AstLinux 1.3 will also boot fine with ''runnix-0.4''.
 For a new installation on a legacy non-PAE board, you can "bootstrap" the process by first installing AstLinux 1.2.10 and then perform a "System Firmware Upgrade:" to a newer AstLinux image.
@@ Line 41: / Line 41: @@
 [[https://s3.amazonaws.com/mirror.astlinux-project/downloads/iso/astlinux-1.2.10-net5501-serial.iso|AstLinux 1.2.10 Soekris net5501 ISO Installer]]
-\\
+AstLinux 1.2.10 is the last official release for the Soekris net5501, though a custom build can be used to generate 1.3 series firmware upgrade images.
+\\