Differences

This shows you the differences between two versions of the page.

--- userdoc:hosted_guest_vm_vultr [2021/12/27 14:32]
abelbeck
+++ userdoc:hosted_guest_vm_vultr [2022/01/25 20:47] (current)
abelbeck
@@ Line 3: / Line 3: @@
 !!Note: AstLinux 1.3.4 or later is required!!
-!!Note: AstLinux 1.4.0 or later is required!! for new instances with Vultr. [[https://sourceforge.net/p/astlinux/mailman/message/37405619/|Linux 3.16.x kernel is no longer compatible for new instances]]
+!!Note: AstLinux 1.4.0 or later is required!! for new instances with Vultr. [[https://sourceforge.net/p/astlinux/mailman/message/37405619/|Linux 3.16.x kernel is no longer compatible for new Vultr instances]]
 **VM Host Specifications:**  [[https://www.vultr.com/pricing/|Vultr]]
@@ Line 28: / Line 28: @@
   * Server Size: Select the 1 CPU, 1024MB Memory for this example
   * Additional Features: None checked is fine, check "Enable IPv6" if desired
+  * Firewall Group: Select the "Setup" firewall group
   * Server Hostname & Label: Define useful names for this instance
@@ Line 44: / Line 45: @@
 You can transfer the ISO directly from the [[https://www.astlinux-project.org|AstLinux Project]] page, use the latest **Guest VM x86-64bit (Video Console)** version, for example the URL for version ''1.4.4'' is:
-  https://s3.amazonaws.com/mirror.astlinux-project/downloads/iso/astlinux-1.4.4-genx86_64-vm.iso
+  https://astlinux-project.org/mirror/downloads/iso/astlinux-1.4.4-genx86_64-vm.iso
 It will take a minute or more to finish transferring.
@@ Line 53: / Line 54: @@
 {{:userdoc:hosted_guest_vm_vultr_add-firewall2.png?1067&nolink|Add Firewall Group}}
+Use the name "Setup" and click "Add Firewall Group".
 {{:userdoc:hosted_guest_vm_vultr_add-setup-firewall2.png?477&nolink|Add Firewall Group}}
-Specify the HTTPS IP address that will be used to setup the AstLinux VM, using "My IP" may be a good choice.  Add the rule by clicking on the Action ''+''.  Add as many trusted HTTPS IP addresses as you wish.
+Specify a trusted HTTPS IP address that will be used to setup the AstLinux VM, using "My IP" may be a good choice.  Add the rule by clicking on the Action ''+''.
 {{:userdoc:hosted_guest_vm_vultr_setup-firewall2.png?888&nolink|New Inbound IPv4 Rules}}
@@ Line 86: / Line 89: @@
 Firewall Group: Select the "Setup" firewall group defined earlier...
-{{:userdoc:hosted_guest_vm_vultr_firewall-group2.png?882&nolink|Firewall Group}}
+{{:userdoc:hosted_guest_vm_vultr_firewall-group2.png?896&nolink|Firewall Group}}
 Server Hostname & Label: Define useful names for this instance...