Differences

This shows you the differences between two versions of the page.

--- userdoc:guest_lxc_container_unifi [2020/06/07 12:55] – abelbeck
+++ userdoc:guest_lxc_container_unifi [2020/06/12 22:50] (current) – abelbeck
@@ Line 4: / Line 4: @@
 **Resource Usage:** (minimum)
-  * Memory: 1024 MB
+  * Memory: 1280 MB
   * Storage: 1.3 GB
 \\
@@ Line 34: / Line 34: @@
 !!Tip ->!! If you prefer not to create a ''unifi.ui.com'' account, you may establish a local-only UniFi instance by clicking on "Switch to Advanced Setup" during "Sign in ..." in setup.
-The UniFi Controller can use a noticeable amount of CPU and RAM resources, depending on the number and type of device. For a small installation you can edit the ''/var/lib/lxc/unifi/config'' file and uncomment the following line:
+The UniFi Controller can use a noticeable amount of CPU and RAM resources, depending on the number and type of device. For a small installation you can edit the ''/var/lib/lxc/unifi/config'' file and uncomment and edit the following line:
-  lxc.cgroup.memory.limit_in_bytes = 1024M
+  lxc.cgroup.memory.limit_in_bytes = 1280M
-to keep the RAM usage from going over 1 GB.  Larger installations may require ''1536M'' or ''2048M'' for good performance.
+to keep the RAM usage from going over 1.28 GB.  Larger installations may require ''1536M'' or ''2048M'' for good performance.
 \\
 !!Related Info ->!! **[[userdoc:guest_lxc_container|LXC container in AstLinux]]**
 \\
@@ Line 50: / Line 49: @@
   ## UniFi DHCP option 43, Controller Assignment
-  ## Example: UniFi Controller IPv4 address 192.168.200.20
   dhcp-option=vendor:ubnt,1,192.168.200.20