This shows you the differences between two versions of the page.
| Both sides previous revision
Previous revision
Next revision
|
Previous revision
|
userdoc:guest_lxc_container_pihole [2020/06/07 08:21]
abelbeck |
userdoc:guest_lxc_container_pihole [2022/01/07 10:20] (current)
mkeuter |
| |
| Replace the ''192.168.200.10'' IP address with your Pi-hole server's static address and uncomment for each subnet you want it to apply. In the web interface, select "Restart DNS & DHCP" to apply the change to the dnsmasq configuration. | Replace the ''192.168.200.10'' IP address with your Pi-hole server's static address and uncomment for each subnet you want it to apply. In the web interface, select "Restart DNS & DHCP" to apply the change to the dnsmasq configuration. |
| | |
| | \\ |
| | **Pi-hole Interface Settings Config** |
| | |
| | Newer versions (2021/12) of Pi-hole default to "Interface Settings" set to "Allow only local requests", which does not work on an LXC container with an interface attached to an internal AstLinux ''lxcbr0'' bridge. You will know this is an issue when no DNS is received and Pi-hole dnsmasq logs "Ignoring query from non-local network". |
| | |
| | One solution is to change the Pi-hole Interface Setting from "Allow only local requests" to "Respond only on interface ...". |
| | |
| |