userdoc:fonebridge

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
userdoc:fonebridge [2012/07/10 17:18]
abelbeck
userdoc:fonebridge [2017/10/26 14:54]
droemel
Line 1: Line 1:
-====== Redfone foneBRIDGE ======+====== Redfone foneBRIDGE2 ======
  
-For !!AstLinux 1.0.4+!! there is a custom build option to provide experimental support for the [[http://red-fone.com/products-new/67.html|Redfone foneBRIDGE]] PRI-to-Ethernet bridges in AstLinux.+For !!AstLinux 1.0.4+!! there is a custom build option to provide __experimental__ support for the [[http://red-fone.com/fonebridge2.html|Redfone foneBRIDGE2]] PRI-to-Ethernet bridges in AstLinux.
  
-The standard installation + configuration procedures are described at the Redfone [[http://support.red-fone.com/index.php|support page]].+The standard installation + configuration procedures are described at the Redfone [[http://red-fone.com/suport.html|support page]]((links to ''red-fone.com'' seem to be broken)).
  
-Redfone suggests to setup an own dedicated LAN between the fonebridge and your Astlinux box, where the TDM-over-Ethernet traffic runs.+Update (2017-10-26): I found a new download page for the tools on [[https://github.com/Redfone/fonebridge2|Github]] 
 + 
 +Redfone suggests to setup an own dedicated LAN between the fonebridge and your AstLinux box, where the TDM-over-Ethernet traffic runs.
  
 In AstLinux you don't need to install anything, you just need to to create a correct ''redfone.conf'' and put it into ''/mnt/kd/'' (as usual in AstLinux), and also setup ''/mnt/kd/dahdi/system.conf'' to reflect that.  In AstLinux you don't need to install anything, you just need to to create a correct ''redfone.conf'' and put it into ''/mnt/kd/'' (as usual in AstLinux), and also setup ''/mnt/kd/dahdi/system.conf'' to reflect that. 
Line 12: Line 14:
 The needed drivers are included by default in **[[userdoc:dahdi|DAHDI]]**. You just need to to set: The needed drivers are included by default in **[[userdoc:dahdi|DAHDI]]**. You just need to to set:
   DAHDIMODS="dahdi_dynamic dahdi_dynamic_ethmf"     DAHDIMODS="dahdi_dynamic dahdi_dynamic_ethmf"  
-The Redfone tools ''fonulator'' and ''fb_flash_util'' are also included within AstLinux. +The Redfone tools ''fonulator'' and ''fb_flash_util'' are also included within AstLinux (custom build)
  
 Normally you would store the configuration permanent into the foneBRIDGE with the ''fonulator'' utility (''--write-config''). If you want to configure your foneBRIDGE(s) on every boot, you can set the  Normally you would store the configuration permanent into the foneBRIDGE with the ''fonulator'' utility (''--write-config''). If you want to configure your foneBRIDGE(s) on every boot, you can set the 
Line 18: Line 20:
 option in your ''user.conf''. option in your ''user.conf''.
  
 +\\ 
 +\\ 
 +\\ 
  • userdoc/fonebridge.txt
  • Last modified: 2019/07/18 17:20
  • by mkeuter