Differences

This shows you the differences between two versions of the page.

--- userdoc:dahdi [2014/04/11 18:33]
abelbeck
+++ userdoc:dahdi [2023/05/29 05:54] (current)
mkeuter [New DAHDI Install]
@@ Line 6: / Line 6: @@
 !!Note ->!! Since AstLinux 1.1.0 the DAHDI Perl scripts "dahdi_genconf" and "dahdi_hardware" can be used to generate and verify a DAHDI configuration.
+!!Note ->!! Since AstLinux 1.4.0 (DAHDI 3.1) "dahdi_hfcs" is no more included!
 ===== New DAHDI Install =====
@@ Line 11: / Line 14: @@
 This page explains the proper way to set up your DAHDI device on Astlinux systems.
-We assume at this point that you have a working Astlinux system and are able to retain password changes over a reboot (meaning that UnionFS is working properly).
+We assume at this point that you have a working Astlinux system and are able to retain password changes over a reboot (ie. **[[userdoc:new-install#persistent_storage_options_gui|persistent storage]]** is configured).
 !!Please read this next step very carefully:!!
@@ Line 21: / Line 24: @@
 !!Never edit ''/etc/rc.conf'' directly!!!
-Edit <configfile>.conf as determined above.  Add or change DAHDIMODS to the correct value.
+Edit <configfile>.conf as determined above.  Add or change ''DAHDIMODS'' to the correct value.
 Examples:
-DAHDIMODS=wctdm #OLD Digium 400p (and clones)\\
+  # OLD Digium 400p (and clones)
-DAHDIMODS=wctdm24xxp # NEW Digium cards 410p, etc\\
+  DAHDIMODS="wctdm"
-DAHDIMODS=rcbfx # Rhino 8 and 24 port analog cards\\
-DAHDIMODS="wcb4xxp dahdi_echocan_oslec" # 2-8 port HFC-multi BRI cards ((formerly supported by mISDN with "hfcmulti"))\\
+  # NEW Digium cards 410p, etc.
-DAHDIMODS=dahdi_hfcs dahdi_echocan_oslec # Since AstLinux 1.0.3: Single port HFC-S BRI cards ((formerly supported by mISDN with "hfcpci" (unofficial 3rd-party driver) ))
+  DAHDIMODS="wctdm24xxp"
+  # Rhino 8 and 24 port analog cards
+  DAHDIMODS="rcbfx"
+  # 2-8 port HFC-multi BRI cards (formerly supported by mISDN with "hfcmulti")
+  DAHDIMODS="wcb4xxp dahdi_echocan_oslec"
+  # Since AstLinux 1.0.3 up to AstLinux 1.3.10: Single port HFC-S BRI cards (formerly supported by mISDN with "hfcpci" (unofficial 3rd-party driver))
+  DAHDIMODS="dahdi_hfcs dahdi_echocan_oslec"
 Create a ''system.conf'' file in ''/mnt/kd/dahdi''.  This will be used after rebooting.
 Create or edit a ''chan_dahdi.conf'' file in ''/mnt/kd/asterisk/''.
 These two files correspond to /etc/dahdi/system.conf, and /etc/asterisk/chan_dahdi.conf in a non-AstLinux Asterisk installation. [[http://www.voip-info.org/wiki/view/DAHDI#ConfigurationFiles|Edit these files according to the DAHDI documentation]].
 ===== Moving from Zaptel to DAHDI =====
-(AstLinux 0.7 or higher)
+!!Note ->!! From AstLinux 0.7 or later.
 Moving from Zaptel to DAHDI is pretty straightforward.  The names of the files have changed and the channel names have changed.  (NOTE that for Asterisk 1.4, you can use ''ZAP/X'' for your channel declarations, but this is deprecated, so you should move to ''DAHDI/X'').