userdoc:dahdi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
userdoc:dahdi [2016/12/18 23:05] – [New DAHDI Install] abelbeckuserdoc:dahdi [2023/05/29 10:54] (current) – [New DAHDI Install] mkeuter
Line 6: Line 6:
  
 !!Note ->!! Since AstLinux 1.1.0 the DAHDI Perl scripts "dahdi_genconf" and "dahdi_hardware" can be used to generate and verify a DAHDI configuration. !!Note ->!! Since AstLinux 1.1.0 the DAHDI Perl scripts "dahdi_genconf" and "dahdi_hardware" can be used to generate and verify a DAHDI configuration.
 +
 +!!Note ->!! Since AstLinux 1.4.0 (DAHDI 3.1) "dahdi_hfcs" is no more included!
 +
 ===== New DAHDI Install ===== ===== New DAHDI Install =====
  
Line 21: Line 24:
 !!Never edit ''/etc/rc.conf'' directly!!! !!Never edit ''/etc/rc.conf'' directly!!!
  
-Edit <configfile>.conf as determined above.  Add or change DAHDIMODS to the correct value.+Edit <configfile>.conf as determined above.  Add or change ''DAHDIMODS'' to the correct value.
  
 Examples: Examples:
Line 37: Line 40:
   DAHDIMODS="wcb4xxp dahdi_echocan_oslec"   DAHDIMODS="wcb4xxp dahdi_echocan_oslec"
  
-  # Since AstLinux 1.0.3: Single port HFC-S BRI cards (formerly supported by mISDN with "hfcpci" (unofficial 3rd-party driver))+  # Since AstLinux 1.0.3 up to AstLinux 1.3.10: Single port HFC-S BRI cards (formerly supported by mISDN with "hfcpci" (unofficial 3rd-party driver))
   DAHDIMODS="dahdi_hfcs dahdi_echocan_oslec"   DAHDIMODS="dahdi_hfcs dahdi_echocan_oslec"
 +  
 Create a ''system.conf'' file in ''/mnt/kd/dahdi''.  This will be used after rebooting. Create a ''system.conf'' file in ''/mnt/kd/dahdi''.  This will be used after rebooting.
 Create or edit a ''chan_dahdi.conf'' file in ''/mnt/kd/asterisk/''. Create or edit a ''chan_dahdi.conf'' file in ''/mnt/kd/asterisk/''.
  • userdoc/dahdi.1482102328.txt.gz
  • Last modified: 2016/12/18 23:05
  • by abelbeck