userdoc:boot-usb-storage

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Last revision Both sides next revision
userdoc:boot-usb-storage [2014/07/06 19:11]
abelbeck
userdoc:boot-usb-storage [2014/07/06 19:12]
abelbeck
Line 7: Line 7:
 The problem is it takes longer for USB storage devices to be recognized and available to the Linux Kernel, compared with IDE or SATA.  While RUNNIX will boot, AstLinux may fail with the message "AstLinux medium not found.", followed by the USB drive mounting a few seconds later as viewed via the console. The problem is it takes longer for USB storage devices to be recognized and available to the Linux Kernel, compared with IDE or SATA.  While RUNNIX will boot, AstLinux may fail with the message "AstLinux medium not found.", followed by the USB drive mounting a few seconds later as viewed via the console.
  
-The simple solution is to add "rootdelay=10" to the AstLinux kernel command-line, explained below.+The simple solution is to add "rootdelay=10" to the AstLinux kernel command-line, described below.
  
 !!Note ->!! It is assumed the AstLinux raw image has been transferred to the USB Flash Drive. !!Note ->!! It is assumed the AstLinux raw image has been transferred to the USB Flash Drive.
  • userdoc/boot-usb-storage.txt
  • Last modified: 2014/07/06 19:15
  • by abelbeck