userdoc:boot-usb-storage

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Next revision Both sides next revision
userdoc:boot-usb-storage [2014/07/06 15:01]
abelbeck 		userdoc:boot-usb-storage [2014/07/06 15:08]
abelbeck
Line 9: Line 9:
 The simple solution is to add "rootdelay=10" to the AstLinux kernel command-line, explained below. The simple solution is to add "rootdelay=10" to the AstLinux kernel command-line, explained below.
  
-!!Note ->!! It is assumed the AstLinux raw image has been already transferred to the USB Flash Drive.+!!Note ->!! It is assumed the AstLinux raw image has been transferred to the USB Flash Drive.
  
 \\ \\
Line 42: Line 42:
  
 Your USB Flash Drive should now fully boot AstLinux when installed into your hardware. Your USB Flash Drive should now fully boot AstLinux when installed into your hardware.
- 
-!!Note ->!! AstLinux doesn't by default include "rootdelay=10" since it adds 10 seconds to the boot process. 
  
 Once the "rootdelay=10" has been added it will be automatically propagated for future upgrades, so this is a one time thing. Once the "rootdelay=10" has been added it will be automatically propagated for future upgrades, so this is a one time thing.
  
 +!!Note ->!! AstLinux doesn't by default include "rootdelay=10" since it adds 10 seconds to the boot process.
  
  • userdoc/boot-usb-storage.txt
  • Last modified: 2014/07/06 19:15
  • by abelbeck