Differences

This shows you the differences between two versions of the page.

--- userdoc:board_qotom_q10922h6 [2025/03/05 08:51]
abelbeck [BIOS Settings]
+++ userdoc:board_qotom_q10922h6 [2025/03/06 05:28] (current)
abelbeck [Qotom Q10922H6 Intel N100 Fanless Appliance]
@@ Line 4: / Line 4: @@
 **Board Specifications:**  [[https://www.qotom.com/products/show/MinI-PC-Q10900H6-S13-Series|Mini PC Q10900H6 S13 Series]]
+  * 2x Aquantia AQC113C NICs (10G/5G/2.5G/1G/100M/10M speeds)
+  * 4x Intel I226-V NICs (2.5G/1G/100M/10M speeds)
 **AstLinux Board Type:**
@@ Line 39: / Line 42: @@
   # coretemp CPU sensor
+\\
+''/etc/rc.modules''
+  ## These modules get modprobe'd when the system starts up.
+  ##
+  ## Comment out any modules you don't need.
+  ##
+  ## Ethernet support
+  #8139cp
+  #8139too
+  #via-rhine
+  #via-velocity
+  #vmxnet3
+  #pcnet32
+  #e1000
+  #e1000e
+  #igb
+  #r8125
+  #r8169
+  #tg3
+  igc
+  #ixgbe
+  #i40e
+  atlantic
 \\
@@ Line 45: / Line 73: @@
 **BIOS Setup for Restore From AC Power Loss:**
-On startup (quickly) press the ''<ESC>'' key to enter the BIOS Setup, go to the "Chipset" -> "PCH-IO Configuration" .  Make the following changes...
+On startup (quickly) press the ''<ESC>'' key to enter the BIOS Setup, go to the "O.E.M." menu..." .  Make the following changes...
-  * ''Restore From AC Power Loss -> Power On''
+  * ''Restore AC Power Loss -> Power On''
 \\
@@ Line 60: / Line 88: @@
   * ''Console Redirection Settings''
     * ''Terminal Type -> VT100''
-  * ''Legacy Console Redirection Settings''
-    * ''Redirect After POST -> BootLoader''
   * ''Windows ... (EMS)''
@@ Line 69: / Line 94: @@
 \\
 Save the above BIOS changes, reboot.
-!!Tip ->!! If you need to choose the boot drive, for example when booting the ISO Installer via a USB drive, on startup (quickly) press the ''F11'' key.
 ===== Photos =====