Protectli VP2430 Intel N150 Fanless Appliance

Note: AstLinux 1.5.10 or later is required

Board Specifications: Protectli VP2430 Datasheet Overview

AstLinux Board Type:

• “genx86_64” (Video Console: HDMI)
• “genx86_64-serial” (Serial Console: 115200 baud)

Complete System Recommended Options:

• coreboot+UEFI BIOS
• Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 64GB)
• Storage: 2.5“ SATA SSD or M.2 2280 NVMe

Total System Power (no HDMI connection): 9 Watts when idle.

Performance: 7.15 secs. (Single-core test, lower is better)

time ( echo "scale=3456; 4*a(1)" | bc -l )

Configuration:

/mnt/kd/rc.conf.d/user.conf

SENSEMODS="coretemp"

ALERT_SOUNDS="startup shutdown"  # Optional Sounds
ALERT_SOUNDS_OCTAVE="1"

/mnt/kd/sensors.conf

# libsensors configuration file
# -----------------------------
# Protectli VP2430 CPU N150

# coretemp CPU sensor

BIOS Setup:

It is recommended to use the coreboot+UEFI BIOS, as such there is no configuration needed. Whether you use a serial or video console, it just works.

Tip -> When using macOS via the serial USB cable, for DEL use Fn + delete

Photos: