userdoc:board_protectli_vp2430

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
userdoc:board_protectli_vp2430 [2025/05/31 16:09]
abelbeck
userdoc:board_protectli_vp2430 [2025/06/01 08:25] (current)
abelbeck
Line 13: Line 13:
  
   * coreboot+UEFI BIOS   * coreboot+UEFI BIOS
-  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 64GB)+  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 16GB)
   * Storage: 2.5" SATA SSD or M.2 2280 NVMe   * Storage: 2.5" SATA SSD or M.2 2280 NVMe
  
 **Total System Power (no HDMI connection):**  9 Watts when idle. **Total System Power (no HDMI connection):**  9 Watts when idle.
  
-**Performance:**  7.15 secs. (Single-core test, lower is better) +**Performance:**  7.15 secs. (Single-core test, lower is better) (8.7 secs with: set-kcmd-cstate disable)
  
   time ( echo "scale=3456; 4*a(1)" | bc -l )   time ( echo "scale=3456; 4*a(1)" | bc -l )
Line 85: Line 85:
 {{:userdoc:protectli_vp2430-bios-boot-order.jpg?nolink|BIOS Boot Order}} {{:userdoc:protectli_vp2430-bios-boot-order.jpg?nolink|BIOS Boot Order}}
  
-!!Tip ->!! Sometimes the "Change Boot Order" does not work as expected, alternatively remove "Network Boot and Utilities" as a boot option, leaving only your SATA/NVMe drive.+!!Tip ->!! Sometimes the "Change Boot Order" does not work as expected, alternatively remove "Network Boot and Utilities" as a boot option, leaving only your SATA/NVMe drive as a boot choice.
  
 \\ \\
  • userdoc/board_protectli_vp2430.1748725761.txt.gz
  • Last modified: 2025/05/31 16:09
  • by abelbeck