Differences

This shows you the differences between two versions of the page.

--- userdoc:board_protectli_vp2430 [2025/05/31 21:05] – abelbeck
+++ userdoc:board_protectli_vp2430 [2025/06/13 12:48] (current) – abelbeck
@@ Line 3: / Line 3: @@
 !!Note: AstLinux 1.5.10 or later is required!!
-**Board Specifications:**  [[https://protectli.com/product/vp2430/|Protectli VP2430]] [[https://protectli.com/wp-content/uploads/2025/04/VP2430-Datasheet-20250404.pdf|Datasheet]] [[https://kb.protectli.com/kb/vp2430-hardware-overview/|Hardware Overview]]
+**Board Specifications:**  [[https://protectli.com/product/vp2430/|Protectli VP2430]] [[https://protectli.com/wp-content/uploads/2025/04/VP2430-Datasheet-20250404.pdf|Datasheet]] [[https://kb.protectli.com/kb/vp2430-hardware-overview/|Hardware Overview]] [[https://youtu.be/-Uta6GdDZm0|Video Review]]
 **AstLinux Board Type:**
@@ Line 13: / Line 13: @@
   * coreboot+UEFI BIOS
-  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 64GB)
+  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 16GB)
   * Storage: 2.5" SATA SSD or M.2 2280 NVMe
 **Total System Power (no HDMI connection):**  9 Watts when idle.
-**Performance:**  7.15 secs. (Single-core test, lower is better)
+**Performance:**  7.15 secs. (Single-core test, lower is better) (8.7 secs with: set-kcmd-cstate disable)
   time ( echo "scale=3456; 4*a(1)" | bc -l )
@@ Line 69: / Line 69: @@
 **BIOS Setup:**
-It is recommended to use the coreboot+UEFI BIOS. Whether you use a serial or video console, it just works.
+It is recommended to use the coreboot+UEFI BIOS, whether you use a serial or video console.
 On startup (quickly) press the ''<DEL>'' key to enter the BIOS Setup.
@@ Line 81: / Line 81: @@
 {{:userdoc:protectli_vp2430-bios-power.jpg?nolink|BIOS Power}}
-Go to the "Change Boot Order".  Make "Network Boot and Utilities" the last choice.
+Go to the "Change Boot Order".  Make your SATA/NVMe drive the first choice.
 {{:userdoc:protectli_vp2430-bios-boot-order.jpg?nolink|BIOS Boot Order}}
-!!Tip ->!! Sometimes the "Change Boot Order" does not work as expected, alternatively remove "Network Boot and Utilities" as a boot option, leaving only your SATA/NVMe drive.
+!!Tip ->!! Sometimes the "Change Boot Order" does not work as expected, alternatively remove "Network Boot and Utilities" as a boot option, leaving only your SATA/NVMe drive as a boot choice.
 \\