Differences

This shows you the differences between two versions of the page.

--- userdoc:board_protectli_vp2430 [2025/05/31 15:56]
abelbeck
+++ userdoc:board_protectli_vp2430 [2025/06/01 08:25] (current)
abelbeck
@@ Line 13: / Line 13: @@
   * coreboot+UEFI BIOS
-  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 64GB)
+  * Memory: 262-pin DDR5-4800 (1.1V) SO-DIMM 8GB (Max 16GB)
   * Storage: 2.5" SATA SSD or M.2 2280 NVMe
 **Total System Power (no HDMI connection):**  9 Watts when idle.
-**Performance:**  7.15 secs. (Single-core test, lower is better)
+**Performance:**  7.15 secs. (Single-core test, lower is better) (8.7 secs with: set-kcmd-cstate disable)
   time ( echo "scale=3456; 4*a(1)" | bc -l )
@@ Line 69: / Line 69: @@
 **BIOS Setup:**
-It is recommended to use the coreboot+UEFI BIOS, as such there only minor configuration needed. Whether you use a serial or video console, it just works.
+It is recommended to use the coreboot+UEFI BIOS, whether you use a serial or video console.
+On startup (quickly) press the ''<DEL>'' key to enter the BIOS Setup.
 !!Tip ->!! When using macOS via the console USB cable, to enter ''DEL'' use ''Fn'' + ''delete''
 {{:userdoc:protectli_vp2430-bios-home.jpg?nolink|BIOS Home}}
+Go to the "Power Management Options".  Make the following change...
 {{:userdoc:protectli_vp2430-bios-power.jpg?nolink|BIOS Power}}
+Go to the "Change Boot Order".  Make your SATA/NVMe drive the first choice.
 {{:userdoc:protectli_vp2430-bios-boot-order.jpg?nolink|BIOS Boot Order}}
+!!Tip ->!! Sometimes the "Change Boot Order" does not work as expected, alternatively remove "Network Boot and Utilities" as a boot option, leaving only your SATA/NVMe drive as a boot choice.
 \\