Differences
This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Next revision Both sides next revision | ||
userdoc:board_pcengines_apu [2014/07/23 08:22] abelbeck |
userdoc:board_pcengines_apu [2016/04/13 12:25] droemel |
||
---|---|---|---|
Line 3: | Line 3: | ||
!!Note: AstLinux 1.1.7 or later is required!! | !!Note: AstLinux 1.1.7 or later is required!! | ||
- | !!Note: | + | !!Note: PC Engines |
- | **Board Specifications: | + | **Board Specifications: |
**AstLinux Board Type:** | **AstLinux Board Type:** | ||
- | * "geni586-serial" | + | * "genx86_64-serial" |
**Complete System Recommended Options:** | **Complete System Recommended Options:** | ||
Line 15: | Line 15: | ||
* !!Note ->!! [[http:// | * !!Note ->!! [[http:// | ||
* Case: case1d2blku / case1d2redu or equivalent. Don't use the silver case. | * Case: case1d2blku / case1d2redu or equivalent. Don't use the silver case. | ||
- | * AC Power Adapter (12 VDC, 2A, inner diameter 2.5 mm, outer 5.5 mm, center positive) | + | * AC Power Adapter (12 VDC, 2A, inner diameter 2.5 mm, outer 5.5 mm, center positive, it differs from the Alix) |
* Storage: mSATA SSD (or SD Card via USB internally, not recommended) | * Storage: mSATA SSD (or SD Card via USB internally, not recommended) | ||
* Included: | * Included: | ||
- | * 2GB (apu1c) or 4GB (apu1d4) DRAM | + | * 2GB (apu1d) or 4GB (apu1d4) DRAM |
**Total System Power: | **Total System Power: | ||
+ | |||
+ | **Performance: | ||
+ | |||
+ | openvpn --genkey --secret /tmp/secret | ||
+ | time openvpn --test-crypto --secret /tmp/secret --verb 0 --tun-mtu 20000 --cipher aes-256-cbc | ||
**Configuration: | **Configuration: | ||
Line 58: | Line 63: | ||
reboot=bios | reboot=bios | ||
+ | | ||
+ | !!Note ->!! This reboot issue is fixed in the beta PC Engines APU1 BIOS apu140708 (2014-07-08). | ||
+ | |||
+ | \\ | ||
If the SD Card is used for storage (not recommended) it is internally connected via USB and requires the following argument to the AstLinux KCMD line: | If the SD Card is used for storage (not recommended) it is internally connected via USB and requires the following argument to the AstLinux KCMD line: |