Differences

This shows you the differences between two versions of the page.

--- userdoc:board_mele_quieterdl [2025/03/05 16:43] – abelbeck
+++ userdoc:board_mele_quieterdl [2025/03/16 14:21] (current) – abelbeck
@@ Line 13: / Line 13: @@
 **Complete System Recommended Options:**
+  * Memory: 4GB (or 8GB) internal, non-upgradable
   * Storage: M.2 NVMe Type 2280 SSD (Silicon Power 128GB SP128GBP34A60M28 or similar)
@@ Line 42: / Line 43: @@
   # coretemp CPU sensor
+\\
+''/etc/rc.modules''
+  ## These modules get modprobe'd when the system starts up.
+  ##
+  ## Comment out any modules you don't need.
+  ##
+  ## Ethernet support
+  #8139cp
+  #8139too
+  #via-rhine
+  #via-velocity
+  #vmxnet3
+  #pcnet32
+  #e1000
+  #e1000e
+  #igb
+  r8125
+  #r8169
+  #tg3
+  #igc
+  #ixgbe
+  #i40e
+  #atlantic
 \\
 **BIOS Setup for Auto Power On:**
-On startup (quickly) press the <ESC> or <DEL> key (many times) to enter the BIOS Setup, go to the "Advanced" -> "Customer Exclusive Functions" tab.  Make the following change...
+On startup (quickly) press the <ESC> or <DEL> key (many times) to enter the BIOS Setup.\\
+Go to the "Advanced" -> "Customer Exclusive Functions" tab.  Make the following change...
   * ''Auto Power On -> Enabled''
@@ Line 55: / Line 82: @@
 Go to the "Chipset" -> "SCS Configuration" tab. Make the following change...
-  * eMMC 5.1 Controller -> Disabled
+  * ''eMMC 5.1 Controller -> Disabled''
 !!Important ->!! Disabling eMMC support will prevent booting to Windows.