userdoc:board_lanner_fw-7525b

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
userdoc:board_lanner_fw-7525b [2017/06/11 08:57]
abelbeck
userdoc:board_lanner_fw-7525b [2019/07/24 22:05]
abelbeck
Line 9: Line 9:
 **AstLinux Board Type:** **AstLinux Board Type:**
  
-  * "genx86_64-serial" (serial console: ''19200'' baud for AstLinux 1.2.10 and earlier, ''115200'' baud for AstLinux 1.3.0 and later)+  * "genx86_64-serial" (Serial Console: ''19200'' baud for AstLinux 1.2.10 and earlier, ''115200'' baud for AstLinux 1.3.0 and later)
  
 **Complete System Recommended Options:** **Complete System Recommended Options:**
Line 24: Line 24:
 **Total System Power:**  10 Watts when idle. **Total System Power:**  10 Watts when idle.
  
-**Performance:**  34.secs. (Maximum OpenVPN: 154 Mbps)+**Performance:**  32.secs. (Single-core test, lower is better)
  
-  openvpn --genkey --secret /tmp/secret +  time ( echo "scale=3456; 4*a(1)" | bc -l )
-  time openvpn --test-crypto --secret /tmp/secret --verb 0 --tun-mtu 20000 --cipher aes-256-cbc+
  
 **Configuration:** **Configuration:**
Line 108: Line 107:
  
  
-Finally, save the above BIOS changes, reboot, and reconfigure you serial terminal program to 19200 baud, this will match what AstLinux expects.+Finally, save the above BIOS changes, reboot, and reconfigure you serial terminal program if you changed the baud rate.
  
 **Photos:** **Photos:**
  • userdoc/board_lanner_fw-7525b.txt
  • Last modified: 2020/04/02 07:52
  • by abelbeck