userdoc:board_bmax_b1_plus

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
userdoc:board_bmax_b1_plus [2023/02/25 09:24]
abelbeck 		userdoc:board_bmax_b1_plus [2023/11/06 15:16]
abelbeck
Line 1: Line 1:
-====== Bmax B1 Plus Celeron N3350 Fanless Mini PC ======+====== Bmax B1 Plus/Pro Celeron N3350/N4000 Fanless Mini PC ======
  
 !!Note: AstLinux 1.5.0 or later is recommended!! !!Note: AstLinux 1.5.0 or later is recommended!!
  
 **Board Specifications:** **Board Specifications:**
 +
 +The Bmax B1 Plus/Pro Mini PC currently (November 2023) can be purchased new for ~$100 USD.  The value proposition is key, running AstLinux quite nicely, albeit with a single ethernet interface. Alternatively, similarly priced Mini PCs with SATA storage or reused thin clients may have a similar setup and configuration.
  
 **AstLinux Board Type:** **AstLinux Board Type:**
Line 15: Line 17:
 **Total System Power (no VGA/HDMI connection):**  3 Watts when idle. **Total System Power (no VGA/HDMI connection):**  3 Watts when idle.
  
-**Performance:**  16.9 secs. (Single-core test, lower is better)+**Performance (B1 Plus):**  16.9 secs. (Single-core test, lower is better)\\ 
 +**Performance (B1 Pro):**  12.7 secs. (Single-core test, lower is better)
  
   time ( echo "scale=3456; 4*a(1)" | bc -l )   time ( echo "scale=3456; 4*a(1)" | bc -l )
Line 37: Line 40:
   # libsensors configuration file   # libsensors configuration file
   # -----------------------------   # -----------------------------
-  # Bmax B1 Plus+  # Bmax B1 Plus/Pro
      
   # coretemp CPU sensor   # coretemp CPU sensor
Line 48: Line 51:
   * ''HD-Audio Support -> Disable''   * ''HD-Audio Support -> Disable''
   * ''SCC eMMC Support -> Disable''   * ''SCC eMMC Support -> Disable''
-  * ''WIFI Support -> Disable'' +  * ''WIFI Support -> Disable''   (no setting on B1 Pro) 
-  * ''Bluetooth Support -> Disable''+  * ''Bluetooth Support -> Disable''   (no setting on B1 Pro)
   * ''Auto Power On Configuration -> Power On''   * ''Auto Power On Configuration -> Power On''
  
Line 71: Line 74:
 Save the above BIOS changes, reboot. Save the above BIOS changes, reboot.
  
-Optional, choose whether UEFI or Legacy boot is enabled (example: UEFI only), go to the "Advanced" -> "CSM Configuration" menu...+Optional, with ''Intel Linux'' enabled, choose whether UEFI or Legacy boot is enabled (example: UEFI only), go to the "Advanced" -> "CSM Configuration" menu...
  
   * ''Boot option filter -> UEFI only''   * ''Boot option filter -> UEFI only''
Line 86: Line 89:
 !!Requires AstLinux 1.5.0 or later!! !!Requires AstLinux 1.5.0 or later!!
  
-Using the CLI, then enter:+Using the CLI, enter the command:
  
   set-kcmd-cstate help   set-kcmd-cstate help
  • userdoc/board_bmax_b1_plus.txt
  • Last modified: 2023/12/30 07:19
  • by mkeuter