Differences

This shows you the differences between two versions of the page.

--- devdoc:devdoc_switch_i586_x86_64 [2015/11/29 10:18]
abelbeck
+++ devdoc:devdoc_switch_i586_x86_64 [2020/04/15 06:35] (current)
mkeuter [Incompatibilities between i586 and x86_64]
@@ Line 1: / Line 1: @@
 ====== Switching Images between i586 and x86_64 ======
-Beginning with SVN r7353 and officially with AstLinux 1.2.5, two new board types were added: genx86_64 and genx86_64-serial.  These boards are x86_64 builds using a 64-bit toolchain, initrd and Linux kernel.
+Beginning with AstLinux 1.2.5, two new board types were added: genx86_64 and genx86_64-serial.  These boards are x86_64 builds using a 64-bit toolchain, initrd and Linux kernel.
 In general, users will be advised to choose either a geni586[-serial] or genx86_64[-serial] install image and stick with that board type, but developers may want to take a shortcut and switch between i586 and x86_64.
@@ Line 25: / Line 25: @@
   * LDAP-AB using slapd, the ''/mnt/kd/ldap/data/data.mdb'' database is specific to 32 or 64 bits and needs to be rebuilt.
   * Asterisk FOP2 uses a binary blob for either 32 or 64 bit systems, so a new version must be installed.  Your configuration should continue to work.
-  * The ''initrd.img'' file that accompanies the run image is specific to 32 or 64 bits, usually not a problem. **Do not** ''revert'' to a different architecture and reboot.
+  * The ''initrd.img'' file that accompanies the run image is specific to 32 or 64 bits, usually not a problem. \\ **Do not** ''revert'' to a different architecture and reboot!
 ===== Upgrade switch to x86_64 (64-bit) or i586 (32-bit) =====