Table of Contents

Legacy Installer ISOs for Old Hardware

Old hardware can't be supported forever, though the AstLinux Project makes an effort to support old hardware as long as practically possible.

AstLinux 1.3.10 and later, only 64-bit, x86_64 installations are supported.

Important: Settings for Serial Console: 19200 baud for AstLinux 1.2.10 and earlier, 115200 baud for AstLinux 1.3.0 and later!

32-bit CPUs that support PAE

Includes the AstLinux bootloader, runnix-0.5


Generic x86-32bit (Video Console) download:

AstLinux 1.3.8 Generic x86-32bit (Video Console)


Generic x86-32bit (Serial Console) download:

AstLinux 1.3.8 Generic x86-32bit (Serial Console)


32-bit CPUs that don't support PAE

Some old generic x86 hardware may contain a CPU that does not support PAE, notably some old, but popular HP thin clients with a Transmeta Crusoe CPU.

The AstLinux bootloader, runnix-0.4 and earlier works with non-PAE hardware, included with AstLinux 1.2.10 and earlier. AstLinux 1.3 and later default to runnix-0.5 which requires a CPU with PAE, but AstLinux 1.3 will also boot fine with runnix-0.4.

For a new installation on a legacy non-PAE board, you can “bootstrap” the process by first installing AstLinux 1.2.10 and then perform a “System Firmware Upgrade:” to a newer AstLinux image (up to 1.3.8).


Legacy Generic x86-32bit (Video Console) download:

AstLinux 1.2.10 Generic x86-32bit (Video Console)


Legacy Generic x86-32bit (Serial Console) download:

AstLinux 1.2.10 Generic x86-32bit (Serial Console)


After initially installing with 1.2.10 … System tab → “System Firmware Upgrade:” to the latest available version (up to 1.3.8).


PC Engines ALIX board

Legacy PC Engines ALIX download:

AstLinux 1.2.10 PC Engines ALIX ISO Installer

AstLinux 1.2.10 is the last official release for the PC Engines ALIX, though a custom build can be used
to generate 1.3 series firmware upgrade images (up to 1.3.8).


Soekris net5501 board

Legacy Soekris net5501 download:

AstLinux 1.2.10 Soekris net5501 ISO Installer

AstLinux 1.2.10 is the last official release for the Soekris net5501, though a custom build can be used
to generate 1.3 series firmware upgrade images (up to 1.3.8).