====== Serial Console speed/tty ======

!!Note ->!! For AstLinux 1.3.0 and later, all serial consoles are ''115200 baud 8N1''.

!!Note ->!! For AstLinux 1.2.10 and earlier, all serial consoles are ''19200 baud 8N1'', unless otherwise noted.

Described here is a method to change the serial console speed/tty, not only currently but also automatically after upgrades.

This applies to the board types of ''geni586-serial'' and ''genx86_64-serial''.

!!Note: AstLinux 1.0.4 or later is required!!

After setting-up AstLinux and creating the persistent storage, the ''setconsole-speed-tty'' command is used to make persistent changes to the serial console speed/tty settings.

Usage:

  Usage: setconsole-speed-tty [ show|reset|help ] 9600|19200|38400|57600|115200 [ ttySn ]

\\
To issue this command you must either SSH into the AstLinux box, or use the CLI tab in the web interface with the "CLI Proxy Server" enabled in the Network tab.  Some example command arguments are:

Set console speed to 19200 baud, using default ttyS0

  setconsole-speed-tty 19200

Set console speed to 115200 baud, using /dev/ttyS1

  setconsole-speed-tty 115200 ttyS1

Display current settings

  setconsole-speed-tty show

Reset /etc/inittab to default factory state with matching kernel console= values
  setconsole-speed-tty reset

\\